RPM DENT REPAIR · SERVING WELLESLEY, MASSACHUSETTS
Paintless Dent Repair Near Wellesley
One Umbrella. Two Aluminum Panels. Original Paint Preserved.
A customer watched an umbrella lift in the wind at an ice cream stop and strike a yellow 2016 Mercedes-AMG GT S. RPM repaired its original aluminum hood and right-front fender using meticulous paintless dent repair—without replacing either panel.
THE REAL REPAIR
Vehicle: 2016 Mercedes-AMG GT S
Panels: Aluminum hood + right-front fender
Fender challenge: Stretched aluminum; PPF stayed installed
Hood PPF: Damaged on impact; removed before repair and replaced afterward
Result: Original panels and factory paint retained

2016 Mercedes-AMG GT S
Actual RPM repair · Aluminum hood + right-front fender
Advanced PDR since 1993
ARC Certified Master Technician
Dedicated Raynham repair facility
THE INCIDENT · NOT AN EVERYDAY DENT
An Ice Cream Stop. An Unexpected Collision.
The Mercedes owner was out for ice cream when the wind caught an umbrella and sent it into the car. They watched it strike the aluminum hood and right-front fender. The hood’s PPF was damaged in the impact, while the fender’s film remained in place for repair.
The challenge was different on each panel: the fender had stretched metal beneath intact PPF, while the hood required removal of damaged film and careful tool access to protect its factory paint.
WHY REPAIR INSTEAD OF REPLACE?
The original panels were worth evaluating first.
A conventional collision estimate may call for replacement and refinishing. RPM assessed the damage and repaired both aluminum panels using traditional PDR techniques.
The aim was to restore the shape while preserving the factory paint that you can never duplicate.
01 / THE IMPACT
A windblown umbrella struck the parked Mercedes.
02 / THE CHALLENGE
Stretched aluminum on the fender, with different PPF conditions on each panel.
03 / THE APPROACH
Protected access, controlled traditional PDR tool work, and no glue pulling.
REPAIR ONE · THE RIGHT-FRONT FENDER
Stretched aluminum. PPF still in place.
The right-front fender had a pronounced dent with stretched aluminum. Because its paint protection film remained installed, the repair required exceptional tool control to protect both the film and the factory finish underneath.


Access through the emblem opening
RPM removed the fender emblem for tool access through an existing opening. The surrounding area was taped off to protect the paint while the metal was worked from behind.
No glue pulling over the PPF
No glue pulling was used. RPM accessed the fender from behind, working the stretched aluminum carefully without disturbing the installed PPF.
REPAIR TWO · THE ALUMINUM HOOD
Protecting the finish from both sides.
The impact damaged the aluminum hood and its paint protection film. The damaged PPF was removed before the metal repair, then replaced after PDR was complete. Throughout the repair, RPM taped the underside where tools contacted the hood to help protect its original factory finish.


Factory paint retained
The repair was performed without repainting the hood. The factory-applied finish remained in place.
Damaged hood PPF replaced
The umbrella damaged the hood’s protective film. RPM removed that film before repairing the aluminum, then replaced it after the repair. The original factory paint remained intact.

WHAT THE LIGHT TELLS US
Precision is visible in the reflections.
The reflection light makes even subtle changes in aluminum contours visible. It helps the technician judge tool placement and pressure while protecting the surrounding finish.
This close-up shows the hood before repair. Compare it with the repaired hood above to see how the contours and reflection lines changed.
WELLESLEY DRIVERS · RAYNHAM CRAFTSMANSHIP
Specialized PDR for vehicles worth preserving.
Drivers from Wellesley and surrounding communities visit RPM Dent Repair’s dedicated Raynham shop for advanced work on complex dents, including aluminum panels and vehicles with paint protection film. Every vehicle receives an individual repair assessment.
For an initial assessment, send clear photographs and an approximately 15-second video taken from 3–4 feet back, with the entire damaged panel visible. Complex aluminum or PPF-covered damage may require an in-person inspection before a firm estimate.
All in-person inspections and repairs are performed at our Raynham facility; we do not offer mobile repairs.
Visit RPM Dent Repair
244 North Main Street, Suite 6
Raynham, MA 02767
QUESTIONS WELLESLEY DRIVERS ASK
What should you know before repairing aluminum or PPF-covered panels?
Practical answers about Mercedes aluminum panels, protective film, repair access, and visiting RPM’s Raynham shop.
Can paintless dent repair work on aluminum Mercedes body panels?
It can when the panel, damage, paint condition, and access are suitable. This Mercedes-AMG GT S case involved PDR repairs to an aluminum hood and right-front fender, but each vehicle requires individual assessment.
Can a stretched aluminum fender be repaired without replacement?
Sometimes. Stretched aluminum increases difficulty and can limit the repair options. RPM was able to repair this particular fender, but the extent of stretching and available access must be evaluated on each vehicle.
Can a dent be repaired while paint protection film is still on the panel?
In some cases, yes. The Mercedes right-front fender was repaired with the existing PPF still in place, using traditional PDR access and careful tool control. That result is not guaranteed for every film or dent.
Was glue pulling used on this Mercedes repair?
No. Glue pulling was avoided because it could damage the PPF. RPM worked with traditional PDR access, including access gained after removing the fender emblem.
Why was the fender emblem removed?
The emblem opening provided an existing access point for PDR tools. RPM protected the surrounding area with tape to reduce the risk of scratching the paint. No new access hole was drilled.
What happened to the PPF on the hood?
The umbrella had damaged the hood PPF. It was removed before traditional PDR, the aluminum hood was repaired while preserving its original factory paint, and new PPF was installed afterward. The fender’s existing PPF, by contrast, stayed in place during its repair.
Do you have a dent repair shop in Wellesley?
RPM Dent Repair serves Wellesley-area drivers from our fixed-location repair facility at 244 North Main Street, Suite 6, Raynham, Massachusetts. We do not operate a separate Wellesley shop or provide mobile repairs.
How can I get an estimate for aluminum or PPF-covered damage?
Send clear photos and an approximately 15-second video showing the whole damaged panel from several feet back. For difficult aluminum dents, stretched metal, or damage beneath PPF, an in-person assessment may be needed before a firm estimate.
BEFORE THE REPLACEMENT ESTIMATE
Find out what advanced PDR may preserve.
An unusual impact does not always mean losing the original panel or factory finish. Show us your damage, and we’ll explain whether an advanced repair might be appropriate.